Download Densifier MSDS sheet. (Word doc)

Where to use Densifier:
It is used on lime-based products.

Why use Densifier:
This product is normally used when the plaster has become too thin because of excessive use of a liquid colorant.

How to use Densifier:
-The product should be slowly poured in the bucket while mixing the material with the beater. Once all the densifier has been added, continue to mix for another minute, then let it rest for a half an hour.
-Normally a 50 gr. jar is enough to thicken one 24 KG bucket. But if necessary, you can add up to 3 jars of densifier.
-Remember that all lime-based products tend to thicken over time, so keep this in mind if the plaster will be applied several hours after mixing.