Stucco Italiano Certifified applicator and talented artisan Mariella Russo sent us some great pics of her recent projects…
In the first one she used Marmorino Carrara on the walls and Golden metallic paints and powder pigments on the ceiling. She also painted the designs in the middle.
And here is a distressed Carrara finish…
A lovely Marmorino Classic finish…
Here is a table before Mariella started…
and after a Carrara finish…
Click on the thumbnails to see more photos of Mariella’s work:
Intonachino has proven to be one of our most popular finishes for exteriors. Its naturally mold-resistant nature makes it perfect for the outdoors, even up here in the rainy northwest.
A while ago, I briefly mentioned a project Tom Williams is working on in Ballard using Intonachino Extra Fine and Medium. It’s worth taking another look. Click on the picture below to see more photos.
Of course, mold-resistance is great for optimal indoor air health as well, so intonachino and other lime plasters are also ideal for interiors. Quoting from this excellent article on lime plaster’s natural mold resistance; “the short answer as to why Venetian plaster is truly mold-resistant is that mold can only grow in an acidic and wet or damp environment. Venetian plasters breathe and do not retain moisture. Molds also require a food source and an acidic environment in which to multiply.”
For both health- and earth-conscious reasons, Venetian style Italian lime plasters are the way to go……
Don’t forget the following:
First, make sure after taping and before applying your Venetian plaster that you burnish your tape edges with a plastic putty knife or some other plastic tool. We actually like to cut up old credit cards and keep them in our tool kits.
After taping and burnishing if you are still concerned about your material bleeding through, use a water-based clear sealer and run it lightly over the edge of the tape using the beveled edge of a foam brush. This should seal that edge and stop any material from ruining that nice clean edge on your decorative painting project.
If you are having difficulty removing your tape, try using a hair dryer to lightly heat up the glue and make removal easier.
When applying Venetian plaster or other stucco or Italian plaster products, bleed should not be an issue. However, you may find when trying to remove your tape after applying Marmorino Carrara or similar Venetian plaster finishes that it can’t be removed cleanly due to the thickness of the plaster material. Try running the edge of your plastic putty knife into the seam where the tape edge is. This should help break the bond between the plaster material and the tape so that removal will be easier.
REMEMBER! 3-M blue tape and other similar painter’s tapes are not low-tack tapes. They are a long mask, medium tack tape. Use a lower tack tape to protect delicate surfaces.…
5 things you’ve probably heard about Venetian plaster, and why they are wrong:
1. You’ve heard: “Venetian plaster is a faux finish.”
The truth: Authentic Venetian plaster is not a faux finish. In fact, it’s the most authentic veneer wall finish you can have. When natural, lime-based venetian plaster is applied it will eventually return to it’s original state, which is lime and marble, AKA stone.
2. You’ve heard: You can buy Venetian plaster at Lowes or Home Depot.
The truth: You will find products labeled “Venetian plaster,” but they are actually composed of acrylic polymers and fillers such as gypsum and/or clay. While these synthetic Venetian plasters made by paint manufacturers may look somewhat similar to the real thing to the untrained eye, it’s been our experience that these synthetics will ultimately fade and become “tired” looking over a relatively short period of time, just like painted walls. Unlike real Venetian Plaster, synthetic Venetians are more closely related to paint than to stone, so this should come as no surprise.
3. You’ve heard: Venetian plaster can’t be applied in the shower, on exteriors, or on any surface that will get wet.
The truth: True Italian Venetian plaster is actually a wonderful choice for surfaces that will get wet. Lime plasters perform extremely well in wet climates by simply allowing any water that is absorbed into the plaster to quickly evaporate and exit the structure. That’s why they’re called Venetian plaster, because they can tolerate rising damp and canal-side applications like in the lagoons of Venice that would cause failure in acrylic and cement plasters. Traditional Moroccan lime plaster Tadelakt has been used in the Hammams (the traditional Moroccan steam baths), and in the riads of Marrakesh for centuries.
4. You’ve heard: Anyone can apply Venetian plaster in their home.
The truth: Well, it’s true that anyone can apply it. But applying it well is a different story. While we definitely aren’t saying you’ll be a pro after one day, our new Introduction to Authentic Venetian Plaster is a good place for a beginner to start understanding the do’s and dont’s of Venetian plaster application. Also, consider hiring a skilled contractor to do the job.
5. You’ve heard: Installing Venetian plaster in your home will break the bank.
The truth: Unlike paints which must be reapplied over and over, Venetian plaster is a lifetime finish. The material is self-healing, much less likely to crack than cement finishes, and naturally mold-resistant, resulting in beautiful walls that will withstand the test of time. Green building will be a key part of America’s economic future, and authentic Venetian plasters are not only beautiful, they fit perfectly into the future of green building.
6. You’ve heard: Venetian plaster is really shiny.
The truth: OK that’s 6 things not 5 you caught me. Yes, Venetian plaster can be brought up to a natural high sheen by compressing the material as it dries. The more compression, the higher the sheen. However, natural lime plasters can also be finished to a rustic matte or satin sheen, depending on which material is used and how it is applied. The possible looks and finishes for Venetian plaster are limitless!
Got any more questions about Venetian plaster? Ask away in the comments and we’ll do our best to shed some light on the subject. …
So what’s the easiest way to finish your inside corners? Usually we go around the whole room and just turn the corner on our first coats, but those finish coats can get real fussy in the corners.
Best way we’ve done and seen done is to put material on your finger – latex glove or finger condom nice to have here – and run it into your corner just like caulk. Easy. Then clean up the wall face you are not working on before proceeding to finish the wall face you are working on. Make sense? I’ll do a short video on that soon.…
Stucco Italiano is a member of the US Green Building Council. Naturally high in pH, lime finishes act as an anti-bacterial surface, neutralizing the development of organic substances such as mold and fungus.
Non-toxic and green, our lime plasters are ideal for interiors or exteriors. A breathable system, our lime plasters allow water vapor to permeate freely so moisture evaporates quickly, unlike acrylic finishes which can trap moisture inside the wall.
